LIMITED 3 YEAR WARRANTY. Produces 30 gallons per hour or 720 gallons per day of ultra pure, low ppm water. Removes 95%+ of chlorine, hardness (calcium & magnesium), excessive minerals (iron), and all other contaminants. Wastes approximately 40% less drain water than other RO systems on the market. Everything included in the box to start producing bottled qualify water. Includes: High-Flow Reverse Osmosis Unit with 1 Carbon Pre-filter & 2 RO Membranes / Inlet Pressure Gauge / Garden Hose Connector & 3.8" lnline Shut-off / 12.5' RO Line, 4.5' Feed Line, 4.5' Drain Line / Instructions

Based on 77° F 50 psi, 750 ppm feed water

The pre filters protects the membrane by pre filtering the water before it reaches the reverse osmosis membrane. They should be changed at least every 6 months, or more often in bad water areas.

The Merlin-Garden Pro comes with two RO membranes elements, which should last 2-4 years. When it is time to replace them, you need to get a pair.

This pump is designed to be installed before the Merlin-Garden Pro to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Merlin-Garden Pro to function properly. People on wells and other situations of low pressure can benefit greatly from this pump. It boosts the pressure up to 70 psi allowing the Merlin-Garden Pro to run with higher flow and efficiency while having better TDS removal. The 5 diaphram pump, specifically designed for the Merlin, is a workhorse but runs quietly. Comes with 120v cord and 1/2" quick connect fittings.

The Flowmaster measures how many gallons of filtered water have gone through the system and alerts you when it's time to change filters. You can program in the filter capacity and when you reach the target number of gallons, the Flowmaster beeps. Important for knowing when to change the pre-filter for the Merlin-GP. Also ensures your system runs at its peak efficiency at removing contaminants. Available in 3/8" quick connect for the Merlin-GP.

Highly efficient and accurate due to its advanced Microprocessor technology. Auto-Off function conserves battery power. The unit shuts off automatically after 20 seconds. Dual range - measures from 0-999 ppm, with a resolution of 1 ppm. From 1000 to 9990 ppm, the resolution is in 10 ppm increments, indicated by a blinking image. Comes factory calibrated. Comes equipped with 3/8" & 1/2" Quick Connect T-fittings for Merlin GP™ for quick install. Measure the untreated water coming in vs. the purified water going out of your reverse osmosis system at any time. Limited 3 year warranty.

Ultra Violet Sterilizer add on for Merlin Garden Pro units. Kills any bacteria, viruses, or biological contaminants in product water. Great for well or surface water sources.

LIMITED 1 YEAR WARRANTY. Produces up to 100 GPD* of ultra-pure, low PPM water. Removes 98%+ of chlorine & contaminants. Wastes approximately 25% less than other RO Systems. Everything included in the box for quick hook-up. Includes: 3-Stage RO Unit / 1 RO Membrane / Carbon Filter/Cleanable Sediment Filter / Automatic Shut-Off Cartridge / Wall Mountable Metal Bracket / Garden Hose Connector / lnline Shut-Off / 8 ft. RO & Drain Line / 5 ft. Inlet Line /Filter Wrench / Instructions.

* Based on a 77° F 60 psi, 550 ppm inlet water

LIMITED 1 YEAR WARRANTY. Produces up to 200 GPD* ultra-pure, low PPM water. Removes 98%+ of chlorine & contaminants. Wastes approximately 25% less than other RO Systems. Everything included in the box for quick hook-up. Includes: 4-Stage RO Unit / 2 RO Membranes / Carbon Filter / Cleanable Sediment Filter / Automatic Shut-Off Cartridge / Wall Mountable Metal Bracket / Garden Hose Connector / lnline Shut-Off / 8 ft. RO & Drain Line / 5 ft. Inlet Line / Filter Wrench / Instructions.

Based on 77° F 60 psi, 550 ppm inlet water

This pump is designed to be installed before the Stealth-RO to boost the inlet pressure. There needs to be at least 40 psi and up to 80 psi of inlet pressure for the Stealth-RO to function properly. People on wells and other situations of low pressure can benefit greatly from this pump. It boosts the pressure significantly, allowing the Stealth-RO to run with higher flow and efficiency while having better TDS removal. The pump is designed for long service life and runs very quietly.

The pre filters protects the membrane by pre filtering the water before it reaches the reverse osmosis membrane. They should be changed at least every 6 months, or more often in bad water areas.

Replacement Membrane for Hydrologic Stealth 100 or 200 Series Reverse Osmosis Systems. Stealth 200 Units utilize two Membranes.